Accessories

Here below you can find a complete list of accessories for Kolver screwdrivers and control units.
Standard cable FR 200063This 5 pin cable is supplied standard with any /FR screwdriver. Length: 98.4 in.
Standard cable TA 250063/NThis 8 pin cable is supplied standard with any /TA torque & angle screwdriver. Length: 98.4 in.
Tool balancers TECBA1
Info
010300New tool balancers TECBA1, code no. 010300, allow screwdrivers to be positioned over the work station for comfortable operation. Models with higher capacity available on request.
ARMPV1 support arms
ARMPV1
010500ARMPV1 support arms, code 010500, consist of a vertical support on which a 180° pivoting arm is attached.
Double output connector DOCK01
DOCK01
020020A double output connector is available for operators using two FAB or RAF screwdrivers in the same working area. One end is to be connected to the controller (cable included), the other end to the drivers. Screwdrivers not to be used at the same time
Double output connector DOCK02
DOCK02
020035A double output connector is available for operators using two KBL..FR (not KBL..FR/CA nor KBL..FR/S) screwdrivers in the same working area. The screwdrivers can be used at the same time.
Double output connector DOCK04
Dock04 Manual DOCK04 ita-eng
020045A double output connector is available for operators using two PLUTO screwdrivers with EDU2AE/TOP in the same working area. The screwdrivers cannot be used at the same time.
Double output connector DOCK04/TA
Manual DOCK04 ita-eng
020045/TAA double output connector is available for operators using two PLUTO screwdrivers with EDU2AE/TOP/TA in the same working area. The screwdrivers cannot be used at the same time.
Extension ring KP05
KP05 Cod 234511-K
234511/KKP05, code 234511/K, is an extension ring to be used with Pluto inline drivers for easier clamping on reaction arms.
Angle Head FAB - ANG HD1
ANG HD1-HD2 FAB-RAF
010100When space is limited a right angle head can be easily attached to lever start FAB screwdrivers. ANG HD1 is the cost effective alternative to ANG HD8. 1/4” hex - max torque 53 in/lbs.
Angle Head RAF - ANG HD2
ANG HD1-HD2 FAB-RAF
010120When space is limited a right angle head can be easily attached to lever start RAF screwdrivers. ANG HD2 is the cost effective alternative to ANG HD9. 1/4” hex - max torque 53 in/lbs.
Angle Head FAB - ANG HD8
Testina ANG HD8-9 REV1
010143When space is limited a right angle head can be easily attached to lever start FAB screwdrivers. Model ANGHD8, code 010143, is suitable to FAB series. 1/4” hex - max torque 53 in/lbs.
Angle head RAF - ANG HD9
Testina ANG HD8-9 REV1
010144When space is limited a right angle head can be easily attached to lever start RAF screwdrivers. Model ANGHD9, code 010144, is suitable to RAF series. 1/4” hex, max torque 53 in/lbs.
Angle head - ANG HD10 - 133 in/lbs
HD10 T Ang 90° PL15 Cod 010145
010145ANG HD10 Angle Head may be used with all Pluto Inline Drivers for applications with limited access with torque up to 133 in/lbs. 3/8” square
Angle Head PLUTO - ANG HD11 - 70 in/lbs
Dimensional Drawing HD11 T Ang 90° PL8 Cod 010146
010146ANGHD11 may be used with all Pluto Inline Drivers for applications with limited access. This heavy duty angle attachment also includes an adaptor that connects Pluto Driver. 1/4” hex, max torque 70 in/lbs.
Angle Head PLUTO - ANG HD12 - 177 in/lbs 010147ANG HD12 Angle Head may be used with all Pluto Inline Drivers for applications with limited access with torque up to 177 in/lbs. 3/8” square
Angle Head KBL - ANG HD15 - 13 in/lbs
HD15 TAng 90° KBL4-15 Cod 010152
010152ANGHD15 can be used with KBL04FR, KBL15FR, KBL04FR/S and KBL15FR/S inline Driver for applications with limited access. 1/4” hex, max torque 13 in/lbs.
Angle Head KBL - ANG HD16 - 26 in/lbs
HD16 Testina 90° KBL30 Cod 010153
010153ANGHD16 can be used with KBL30FR and KBL30FR/S inline Driver for applications with limited access. 1/4” hex, max torque 26 in/lbs.
Socket tray for TOP unit
Socket_Tray_IO Socket tray drawing Manual Socket Tray eng
020042When using a multiple torque system a socket tray can be a useful accessory for program selection. It's very easy to use: the control unit automatically selects the correct preset program when a bit or socket is removed.
Switchbox for TOP unit
Switchbox EDU 2AE-TOP Manual Switch-box eng
020033A switch box can be a useful accessory for multiprogram selection. It's very easy to use: each time a button is pushed, the control unit automatically selects the preset program.
KBL clutch cover 02002- 02002-/CAClutch cover for KBL. Code 020028 for KBL04-15FR; Code 020028/CA for KBL04-15FR/CA; Cod. 020029 for KBL30FR; Code 020029/CA for KBL30FR/CA.
Autocatcher 01011-An Autocatcher allows the operator to to pick up and fasten stainless steel, brass, copper and plastic screws by using one hand! Sizes available: AC2.3 for M2 to M3, code 010113, AC3.5 for M3 to M5, code 010114.
ACE Screw Counter
Manual ACE Screwcounter ENG ACEeng
02002-The ACE screw counter is a process control system that monitors the fastening assembly process. It tracks, in real time, the fastening of each screw in an assembly, then notifies the result.
Telescopic Spindle
Telescopic spindles-alberini telescopici overview Dimensional_Drawing_Telescopic_Spindles
8003--The Telescopic Spindle (axial compensator) is used in multi spindle applications to balance the screw tightening process and compensate depth difference across multiple fasteners.
Coloured Rings
Rings
2000--Coloured rings are useful to distinguish and identify different screwdrivers at a glance. Available in different colours: Code 200085 - Blue Code 200086 - Red Code 200087 - Yellow Code 200088 - Green Code 200089 - Black
Barcode reader BRCR90
barcode
020050The BRCR90 barcode reader allows the operator to instantly select the program previously set on the control unit. To be used with EDU2AE/TOP or EDU2AE/TOP/TA.
Serial Printer PRNTR1
PRNTR1_eng Sample prints
020026The PRINTR1 serial printer gives the possibility to instantly print the results of each tightened screw. It works with EDU2AE/TOP, EDU2AE/TOP/TA, EDU2AE/HPRO control units and K and Mini K../S torque testers.
Ethernet Device
Manuale Ethernet_151014 Ethernet device
020075Kolver Ethernet Device (code 020075) makes it possible to connect a PC to any EDU 2AE/TOP - TOP/E - TOP/TA via remote LAN connection.
Cable with strain relief
Cavo con molla
250063/HThe cable with spring is more resistant thanks to a longer connector and spring, which makes the cable up to 4 times more endurable. Perfectly compatible with any 5 pin (code 200063/H) or 8 pin (code 250063/H) screwdriver/control unit.
Light stack
Img Light Stack - Torretta led ITA-ENG 030817
020080The light stack allows better visibility of output signals. Made for any control unit with signals. Supplied standard with 2,5m cable and 10pin connector for CN1 (EDU2AE - EDU2AE/TOP). Wiring for other Kolver control units available on request.
Start / Reverse Pedals
Pedals
020070Start and reverse signals can now be activated using our new foot pedal. Supplied standard with 3,5 m cable and connector for any EDU2AE and EDU2AE/TOP unit.
A2 and A3 Suction Heads
ASP_eng
010111/-A suction head is the best way to handle non-magnetic screws (stainless steel, brass, plastic etc.). Available in two models: A2 for M2-M2,6 screws (code 010111/1) and A3 for M3-M4 screws (code 010111/2). A2 and A3 can be installed on any screwdriver
ASP HD Suction Heads
Suction Heads for NATO Screwdrivers
0101--A Suction Head is the best way to handle non-magnetic screws (stainless steel, brass, plastic etc). Available for NATO 15 (model ASP HD6, code 010117) and NATO50 (model ASP HD7, code 010118).
RIV HD Bit Guides
Bit Guides for PLUTO and KBL Screwdrivers
01018xBit Guides are the best accessory to help long bits, wire thread insert and riveters keep the correct perpendicular position. For PLUTO and KBL screwdrivers.
Reduced Front Ring for PLUTO
PLUTO with reduced front ring
234515Inline PLUTO screwdrivers can be supplied with reduced front ring (code 234515). The new reduced front ring, code 234515, is also available as accessory/spare part and supplied with four M3x6 screws.
Model: Standard cable FR
Code: 200063
Features: This 5 pin cable is supplied standard with any /FR screwdriver. Length: 98.4 in.
Model: Standard cable TA
Code: 250063/N
Features: This 8 pin cable is supplied standard with any /TA torque & angle screwdriver. Length: 98.4 in.
Model: Tool balancers TECBA1
Info
Code: 010300
Features: New tool balancers TECBA1, code no. 010300, allow screwdrivers to be positioned over the work station for comfortable operation. Models with higher capacity available on request.
Model: ARMPV1 support arms
ARMPV1
Code: 010500
Features: ARMPV1 support arms, code 010500, consist of a vertical support on which a 180° pivoting arm is attached.
Model: Double output connector DOCK01
DOCK01
Code: 020020
Features: A double output connector is available for operators using two FAB or RAF screwdrivers in the same working area. One end is to be connected to the controller (cable included), the other end to the drivers. Screwdrivers not to be used at the same time
Model: Double output connector DOCK02
DOCK02
Code: 020035
Features: A double output connector is available for operators using two KBL..FR (not KBL..FR/CA nor KBL..FR/S) screwdrivers in the same working area. The screwdrivers can be used at the same time.
Model: Double output connector DOCK04
Dock04 Manual DOCK04 ita-eng
Code: 020045
Features: A double output connector is available for operators using two PLUTO screwdrivers with EDU2AE/TOP in the same working area. The screwdrivers cannot be used at the same time.
Model: Double output connector DOCK04/TA
Manual DOCK04 ita-eng
Code: 020045/TA
Features: A double output connector is available for operators using two PLUTO screwdrivers with EDU2AE/TOP/TA in the same working area. The screwdrivers cannot be used at the same time.
Model: Extension ring KP05
KP05 Cod 234511-K
Code: 234511/K
Features: KP05, code 234511/K, is an extension ring to be used with Pluto inline drivers for easier clamping on reaction arms.
Model: Angle Head FAB - ANG HD1
ANG HD1-HD2 FAB-RAF
Code: 010100
Features: When space is limited a right angle head can be easily attached to lever start FAB screwdrivers. ANG HD1 is the cost effective alternative to ANG HD8. 1/4” hex - max torque 53 in/lbs.
Model: Angle Head RAF - ANG HD2
ANG HD1-HD2 FAB-RAF
Code: 010120
Features: When space is limited a right angle head can be easily attached to lever start RAF screwdrivers. ANG HD2 is the cost effective alternative to ANG HD9. 1/4” hex - max torque 53 in/lbs.
Model: Angle Head FAB - ANG HD8
Testina ANG HD8-9 REV1
Code: 010143
Features: When space is limited a right angle head can be easily attached to lever start FAB screwdrivers. Model ANGHD8, code 010143, is suitable to FAB series. 1/4” hex - max torque 53 in/lbs.
Model: Angle head RAF - ANG HD9
Testina ANG HD8-9 REV1
Code: 010144
Features: When space is limited a right angle head can be easily attached to lever start RAF screwdrivers. Model ANGHD9, code 010144, is suitable to RAF series. 1/4” hex, max torque 53 in/lbs.
Model: Angle head - ANG HD10 - 133 in/lbs
HD10 T Ang 90° PL15 Cod 010145
Code: 010145
Features: ANG HD10 Angle Head may be used with all Pluto Inline Drivers for applications with limited access with torque up to 133 in/lbs. 3/8” square
Model: Angle Head PLUTO - ANG HD11 - 70 in/lbs
Dimensional Drawing HD11 T Ang 90° PL8 Cod 010146
Code: 010146
Features: ANGHD11 may be used with all Pluto Inline Drivers for applications with limited access. This heavy duty angle attachment also includes an adaptor that connects Pluto Driver. 1/4” hex, max torque 70 in/lbs.
Model: Angle Head PLUTO - ANG HD12 - 177 in/lbs
Code: 010147
Features: ANG HD12 Angle Head may be used with all Pluto Inline Drivers for applications with limited access with torque up to 177 in/lbs. 3/8” square
Model: Angle Head KBL - ANG HD15 - 13 in/lbs
HD15 TAng 90° KBL4-15 Cod 010152
Code: 010152
Features: ANGHD15 can be used with KBL04FR, KBL15FR, KBL04FR/S and KBL15FR/S inline Driver for applications with limited access. 1/4” hex, max torque 13 in/lbs.
Model: Angle Head KBL - ANG HD16 - 26 in/lbs
HD16 Testina 90° KBL30 Cod 010153
Code: 010153
Features: ANGHD16 can be used with KBL30FR and KBL30FR/S inline Driver for applications with limited access. 1/4” hex, max torque 26 in/lbs.
Model: Socket tray for TOP unit
Socket_Tray_IO Socket tray drawing Manual Socket Tray eng
Code: 020042
Features: When using a multiple torque system a socket tray can be a useful accessory for program selection. It's very easy to use: the control unit automatically selects the correct preset program when a bit or socket is removed.
Model: Switchbox for TOP unit
Switchbox EDU 2AE-TOP Manual Switch-box eng
Code: 020033
Features: A switch box can be a useful accessory for multiprogram selection. It's very easy to use: each time a button is pushed, the control unit automatically selects the preset program.
Model: KBL clutch cover
Code: 02002- 02002-/CA
Features: Clutch cover for KBL. Code 020028 for KBL04-15FR; Code 020028/CA for KBL04-15FR/CA; Cod. 020029 for KBL30FR; Code 020029/CA for KBL30FR/CA.
Model: Autocatcher
Code: 01011-
Features: An Autocatcher allows the operator to to pick up and fasten stainless steel, brass, copper and plastic screws by using one hand! Sizes available: AC2.3 for M2 to M3, code 010113, AC3.5 for M3 to M5, code 010114.
Model: ACE Screw Counter
Manual ACE Screwcounter ENG ACEeng
Code: 02002-
Features: The ACE screw counter is a process control system that monitors the fastening assembly process. It tracks, in real time, the fastening of each screw in an assembly, then notifies the result.
Model: Telescopic Spindle
Telescopic spindles-alberini telescopici overview Dimensional_Drawing_Telescopic_Spindles
Code: 8003--
Features: The Telescopic Spindle (axial compensator) is used in multi spindle applications to balance the screw tightening process and compensate depth difference across multiple fasteners.
Model: Coloured Rings
Rings
Code: 2000--
Features: Coloured rings are useful to distinguish and identify different screwdrivers at a glance. Available in different colours: Code 200085 - Blue Code 200086 - Red Code 200087 - Yellow Code 200088 - Green Code 200089 - Black
Model: Barcode reader BRCR90
barcode
Code: 020050
Features: The BRCR90 barcode reader allows the operator to instantly select the program previously set on the control unit. To be used with EDU2AE/TOP or EDU2AE/TOP/TA.
Model: Serial Printer PRNTR1
PRNTR1_eng Sample prints
Code: 020026
Features: The PRINTR1 serial printer gives the possibility to instantly print the results of each tightened screw. It works with EDU2AE/TOP, EDU2AE/TOP/TA, EDU2AE/HPRO control units and K and Mini K../S torque testers.
Model: Ethernet Device
Manuale Ethernet_151014 Ethernet device
Code: 020075
Features: Kolver Ethernet Device (code 020075) makes it possible to connect a PC to any EDU 2AE/TOP - TOP/E - TOP/TA via remote LAN connection.
Model: Cable with strain relief
Cavo con molla
Code: 250063/H
Features: The cable with spring is more resistant thanks to a longer connector and spring, which makes the cable up to 4 times more endurable. Perfectly compatible with any 5 pin (code 200063/H) or 8 pin (code 250063/H) screwdriver/control unit.
Model: Light stack
Img Light Stack - Torretta led ITA-ENG 030817
Code: 020080
Features: The light stack allows better visibility of output signals. Made for any control unit with signals. Supplied standard with 2,5m cable and 10pin connector for CN1 (EDU2AE - EDU2AE/TOP). Wiring for other Kolver control units available on request.
Model: Start / Reverse Pedals
Pedals
Code: 020070
Features: Start and reverse signals can now be activated using our new foot pedal. Supplied standard with 3,5 m cable and connector for any EDU2AE and EDU2AE/TOP unit.
Model: A2 and A3 Suction Heads
ASP_eng
Code: 010111/-
Features: A suction head is the best way to handle non-magnetic screws (stainless steel, brass, plastic etc.). Available in two models: A2 for M2-M2,6 screws (code 010111/1) and A3 for M3-M4 screws (code 010111/2). A2 and A3 can be installed on any screwdriver
Model: ASP HD Suction Heads
Suction Heads for NATO Screwdrivers
Code: 0101--
Features: A Suction Head is the best way to handle non-magnetic screws (stainless steel, brass, plastic etc). Available for NATO 15 (model ASP HD6, code 010117) and NATO50 (model ASP HD7, code 010118).
Model: RIV HD Bit Guides
Bit Guides for PLUTO and KBL Screwdrivers
Code: 01018x
Features: Bit Guides are the best accessory to help long bits, wire thread insert and riveters keep the correct perpendicular position. For PLUTO and KBL screwdrivers.
Model: Reduced Front Ring for PLUTO
PLUTO with reduced front ring
Code: 234515
Features: Inline PLUTO screwdrivers can be supplied with reduced front ring (code 234515). The new reduced front ring, code 234515, is also available as accessory/spare part and supplied with four M3x6 screws.